“WAKE UP/SLEEP” FUNCTION
This feature allows the stud to stay in "sleep" mode before the road application, extending the autonomy of the battery, which can be very useful during installation delays or storage. Once active ('wake up' mode) roads studs can be setting in 'sleeping' mode during a time, for example, in case of roadworks.
AUTOMATIC BRIGHTNESS CONTROL
The function allows the i-stud to adapt to the brightness and regulate its light level in accordance with the energy charged during the day. In the period of night when the studs are active, the automatic brightness control manages the energy stored, adapts the brightness and adjusts the lighting level according to the energy charged.
All i-studs evolution can have their brightness level manually adjusted from 0 to 100%.
WORKING PERIOD FUNCTION
The feature allows the user to set up the number of hours that the i-stud should work after night detection, in situations where roads studs do not have to operate all night long. This means that studs can conserve energy for times when they do need to be active.
OPERATION MODE FLASH/ALWAYS ON
With the operation mode function the user can easily switch the stud’s mode from ‘flashing’ to ‘always on’ and vice versa after installation, whereas conventional studs would all have to be replaced.
To take full advantage of the road stud’s performance, the flash rate can be modified after installation and adjusted appropriately to provide a more effective warning to drivers.
NIGHT LEVEL DETECTION
The lighting level detection (Lux) can easily be adjusted to avoid the studs not become operational at night due to bright streetlighting nearby.
OPERATION MODE UNIDIRECTIONAL / BIDIRECTIONAL
With this ability to choose between ‘unidirectional’ and ‘bidirectional’ operating mode, the light direction can be modified without needing to replace the existing studs, either temporarily or permanently. Also, the stud is able to be programmed according to each project, which removes the need to keep a stockpile of different studs.
This function can help to prevent road accidents during ice formation conditions. Through a temperature sensor, the i-stud can detect when there is the possibility of ice forming on roads, and then, change its LEDs colours to warn drivers about the risky weather condition.
With this feature, if a problem with the stud is detected, the unit is able to make an internal log and analyse the most relevant values in order to recognise what the causes of its abnormal operating are. This helps to solve the problems in a faster and more effective way.
Use of microcontroller technology
Appropriate for regular traffic zones and areas of poor visibility
Ideal for road delineation, bends/curves, crosswalks among others applications
Rising from road surface of 15mm
SLEEP mode to prevent discharge during storage / transport
Constant brightness during all functioning period
Protection against deep discharge of the batteries / capacitors
High performance photovoltaic solar module
Energy storage in super capacitors or batteries
Internal prismatic system
Up to 1Km visibility distance due to high intensity led’s
Many led’s color options for all kind of applications
Different CAP treatments available by request
Always On: 1000h (Battery), 35 (Capacitor)
Flashing: 2500h (Battery), 70 (Capacitor)
Autonomy after full charge: 12 Months
Working Temperature: -25 ºC to +85ºC
Modes of Operation: Always On or Flashing
LED's Configuration: Unidirectional or Bidirectional
LEDs Quantity: 1 or 2 LEDs (unidirectional), 2 or 4 LEDs (bidirectional)
LED Type: 5mm
LEDs Colour: White, Warm White, Red, Amber, Green, Blue
Viewing Angle: 15.º
Dimensions: Ø144 x 87 mm
Weight: 1 Kg
Mechanical Resistance: 20 Tons
Protection Index: IP68 and IK10